The pulp of microwave drying sterilization equipment

2018-01-29 12:03:29

Compared with the box type and vacuum microwave drying equipment, the tunnel type microwave drying equipment has the main advantages of continuous drying, large production and low labor intensity. Compared with the traditional equipment has the advantages of high efficiency, low enerLD consumption, the uniform heating, the drying speed is fast, the thermal inertia, the safety and environmental protection, the advantages of simple operation, easy to control etc..

The pulp of microwave drying sterilization equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.Conventional thermo - thermal sterilization starts from the surface of the material, but there is an internal and external temperature difference through the heat conduction to the interior. In order to maintain the food flavor, shorten the processing time.

Often the food inside does not reach enough temperature to affect the germicidal effect. Due to the penetration of microwave Ken, when the food is treated as a whole, the surface and the interior are simultaneously affected, so disinfection and sterilization are even and complete.

The pulp of microwave drying sterilization equipment

Microwave has a strong penetrating power of cardboard, paper tubes, practical application of microwave drying in cardboard production compared with the conventional technoloLD, not only speed, low enerLD consumption, but also greatly improve the product quality.I company specializing in the production of microwave drying equipment - microwave planks, cardboard drying equipment is suitable for thick board, wood, gray paper, corrugated cardboard, paper products, paper tube, honeycomb cardboard, paper bowl of environmental protection, such as cardboard box rapid drying.The equipment are specially designed for a variety of plate "big mouth" tunnel drying equipment, equipment width size make to order for material.
The characteristics of microwave heating dry:
1, rapid heating, high efficiency and enerLD saving of microwave heating and conventional heating methods (heat conduction, convection and radiation) is completely different, and the mechanism of fever, it can make the heated material itself does not need to heat transfer process, and equipment and air don't absorb heat, boring absurdism instantly at heating temperature, compared with the traditional electrical heating, far infrared heating enerLD saving more than 2 to 3 times.At the same time, improve heating efficiency of 3-5 times.Microwave drying 8 to 50 mm thick board, moisture drying from 30% to 30%, the drying time for 3 to 5 minutes.
2, uniform heating, microwave can penetrate to the internal material and improve the quality of the product list of material at the same time generate heat, won't produce coke endogenous phenomenon.As the material surface moisture to evaporate, material surface temperature will be sligLDly below the layer temperature, temperature gradient from outside to inside, and in the process of heating with the migration direction of the vapor pressure and heat transfer in the same direction.According to the material drying theory, the dry heating status is extremely beneficial to material.Cardboard hardness, compressive ability is greatly increased after microwave drying;
3, small thermal inertia, microwave heating of the immediacy of easy to control the output of enerLD immediately absorbed by material and heating.And traditional heating mode, they will output enerLD absorbed by the material absorption and furnace body at the same time.Microwave heating electricity, as long as control power of microwave heating or terminate immediately, can be realized without thermal inertia, which can realize automation control of heating process.The traditional heating method, thermal inertia is larger, it is difficult to realize automatic control, heated hard to ensure product quality.
4, safe environmental protection microwave enerLD concentration and heating quickly, do not produce radioactive hazard, and the whole process without harmful gas emissions, does not produce waste heat and dust pollution.
5, mouldproof, sterilization of microwave drying and has antiseptic effect, thus greatly improving the cardboard mildew resistance, extend the shelf life.
6, enerLD-efficient environmental protection;Safety and health, environmental protection, no noise, no pollution.Easy to control, easy to realize automatic production;Save area, improve working conditions.Coke, overcome the kiln drying deformation phenomenon;Easy to operate, save manpower, cover an area of an area small;

Model TL-45
Rated input power(KVA) 63kw
Microwave output power(KW) 45kw
Expected dehydration(kg/h) 45~52
Expected sterilization capacity(kg/h) 600~700
Size L*W*H(mm) 11810*1440*1750

Please contact me :LDN:cn1510382150

...

Categories