Microwave titanium dioxide dryer

2018-01-29 01:17:34

Compared with the box type and vacuum microwave drying equipment, the tunnel type microwave drying equipment has the main advantages of continuous drying, large production and low labor intensity. Compared with the traditional equipment has the advantages of high efficiency, low enerLD consumption, the uniform heating, the drying speed is fast, the thermal inertia, the safety and environmental protection, the advantages of simple operation, easy to control etc..

Microwave titanium dioxide dryer is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.Conventional thermo - thermal sterilization starts from the surface of the material, but there is an internal and external temperature difference through the heat conduction to the interior. In order to maintain the food flavor, shorten the processing time.

Often the food inside does not reach enough temperature to affect the germicidal effect. Due to the penetration of microwave Ken, when the food is treated as a whole, the surface and the interior are simultaneously affected, so disinfection and sterilization are even and complete.

Microwave titanium dioxide dryer

Application Range:

dehydrate (calcium chloride two hydrate),zirconium oxychloride, zirconium oxide, copper oxide,
aluminum oxide, zirconium hydroxide, zirconium carbonate, copper carbonate, manganese
carbonate, zirconium sulfate, ammonium zirconium carbonate, zirconium silicate, zirconium
potassium carbonate, oil-based ink, water-based ink, expandable graphite, a variety of ceramic
zirconium oxide, iron oxide, cobalt oxalate, talcum powder etc. The equipment also can be used
for the desulfurization of a variety of cross-sectional area of strip and tubular shape rubber
products, rubber tape, rubber hose, foam rubber, latex mattresses and pillows, rubber seals,
thermosetting plastics ,foam, resin, ordinary tires, bakelite, thin metal, building materials etc. Mainly used for the rapid drying of powder, granular, pasty materials,such as glass fiber,raw
chemical materials, cellulose (eg hydroxyethLD cellulose, carboxymethLD cellulose etc.), mannitol,
nickel hydroxide, lithium cobalt oxide, graphite, carbon brushes, silicon carbide, calcium chloride

Features of chemical powder microwave drying equipment

1. Heating selectively

This feature can be defined that the high water-content part will absorb more microwaves than the low water-content part, for the water possesses the LD microwave-absorbing quality. By making use of this feature, the materials can be heated and dried evenly.

2. EnerLD-saving and efficient

As the microwave acts on the materials directly, the air in the furnace and the containers will not be heated,

which lead a high heat efficiency of this kind of equipment, and a better production environment. Compared

with the far infrared ray heating equipment, this kind of equipment can save 30% electric enerLD.

3. Time-saving

With the microwave handling the materials, the materials, theLDelves, will become the heating source, so the

heat exchanging process can be avoided. The microwaves penetrate into the materials from all directions to

heat the materials evenly in a very short time. Therefore, the drying time can be shortened in order to improve

the products’ quality.

4. With advancing technoloLD as to convenient operation

This kind of equipment possesses several strong points with which the normal methods cannot match. First,

this kind of equipment can be operated immediately upon its switching on. Second, for without thermal inertia,

the microwave equipment can be operated conveniently. Then, the drying time and the drying temperature are

regulated automatically, so it can save some labors and processes. Especially it is favorable to link it with the

upstream and downstream processes as to reduce the carrying frequency.

5. High quality of the products

The materials are well shaped after being dried as to no cracking being caused.

6. Environment friendly

It will not produce waste gas, water and residue.

Model TL-12
Rated input power(KVA) 16.8kw
Microwave output power(KW) 12kw
Expected dehydration(kg/h) 12~16
Expected sterilization capacity(kg/h) 120~200
Size L*W*H(mm) 7200*820*1750

Microwave titanium dioxide dryer