palm oil dewaxing

2018-02-01 10:13:15

palm oil dewaxing from Shandong Microwave Machinery Co.,Ltd.
Main Application of palm oil dewaxing:
This processing line of palm oil dewaxing is mainly used for pretreatment processing for sea cucumber and similar seafood products;
Capacity of palm oil dewaxing: from 500-1000kg/hr for fresh materials;
Washing damage ratio: Main processing flow of Pretreatment Processing Line from Shandong Microwave Machinery Co.,Ltd. :
The processing of Pretreatment Processing Line have the complete processing flows for gutting, soaking, washing, blanching/cooking, cooling
and dewatering. This processing line of palm oil dewaxingcan follow with vacuum freeze drying, hot air dehydration and other
processes to make FD or AD sea cucumber value added products.
1) Food processing technology consultency;
2) Working flow of Pretreatment Processing Line layout design;
3) Plant layout for processing line equipments;
4) Onsite guide of installation and commissioning;
5) Pretreatment Processing Line Training for local operators;
6) palm oil dewaxing After sales technical support.

palm oil dewaxing

palm oil dewaxing

palm oil processing

1, palm oil dewaxing reason

The wax is a combination of monocarboxylic acids and monohydric alcohol. It has a higher melting

point (78-82 C) and is hard to be dissolved in oil or absorbed by human body. The wax impacts

on oil taste, transparency, also affects the processing. So it should be removed from the crude oil.

2, palm oil dewaxing process introduction

Oil dewaxing process works under slowly stirring and cools the oil to certain temperature in fixed

time (technical security), and make waxy formed bigger crystallization, then separation eLDalation,

after filtering, it separates the fluid oil and solid fat. After fractionation, the oil will be clean after 5.5

hours in 0 ℃, but it also can keep the transparency and flowability in the refrigerator and improve

the oil quality and appearance.

3, palm oil dewaxing main procedures

1, Crystallization

2, Filtering

3, Part of palm oil fractionation plant

Company Information

Company Information

Our Strength

1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil

industry.

2, We have deep cooperation with Henan Machine Design Research Institute and Henan University of

Technology. Our professor often go abroad attending grain and oil conference and forum.

3, We have completed service line including technical department, engineering department, project department,

electronic commerce department, domestic trade department and foreign trade department. After signing

contract, we will set up special team including engineers, installation technicians, drawing designer,

business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service

  • Whole set of equipment for production line.

  • Motor and power control system.

  • Installation material.

  • Installation and test-run.

  • Drawing of process description, equipment layout, foundation and

    hole, construction.

  • Drawing of power control.

  • Isolation and painting for equipment.

  • Water recycling and cooling system outside the plant (i.e. supplementary device).

  • Staff training and long-term technical service.

Main Business Field

  • 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
  • 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
  • 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
  • DTDC separated machine, the full negative pressure evaporation,
  • Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
  • 30-1000T/D continuous physical (chemical) refining line.
  • 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
  • 10-200T/D fatty acid esterification edible oil production line.
Our Installation Site Certificates

Our Certificates

Contact Information

Shandong Microwave Machinery Co.,Ltd.is a Pretreatment Processing Line factory specializing in the production of palm oil dewaxing, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Pretreatment Processing Linecustomers with design and services of 1-2000 tons palm oil dewaxing. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Pretreatment Processing Lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Pretreatment Processing Lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Pretreatment Processing Lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: sales10@ldfoodmachine.com

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Categories