vertical sterilizing for FFB processing,Sterilizing for palm fruit pressing

2018-01-31 16:04:34

Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole grains microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

vertical sterilizing for FFB processing,Sterilizing for palm fruit pressing

Product Description

Brief introduction of Palm fresh bunch (FFB ) to Palm Crude Oil (CPO) equipment

FFB→Sterilization→Threshing(Separate the fruit from the bunch)→Digesting(stirring the fruit)→pressing →Purification → CPO

Main process of palm oil processing equipment

1. Raw materials storage section: Fresh palm fruit bunch must be first measurement recorded by the pound into the plant, then unloaded to loaded fruit slopes and stored

.2. Sterilizing section: fresh palm fruit bunch are airtight sterilized in sterilizer. The purpose is to prevent enzymes broken down, avoiding FFA content in oil further increase; easy threshing machinery; pretreatment peel, prepared for the follow-up processing; pre-conditioning stone, reducing the damage kernel.

3. Threshing section: The purpose of threshing is to separate oil palm fruit from the fruit bunch through strong vibration, Threshing equipment is revolving drum thresher. The separated oil palm fruit is ejected then into the pressing section. Empty fruit bunch be ejected to the yard from the other side of the revolving drum, or shipped out from the plant as palm orchards slipcover to recycling use, or burning in the locale as fertilizer for agricultural land.

4. Pressing section: Before pressed, oil palm fruit first be carried out cooking, sterilized fruit must be re-heated to make the pulp soft and damage pulp cell structure. Then enter into continuous screw press for pressing. After pressing, oil palm fruit is divided into two parts: oil, water, solid impurities mixture and the press cake (fiber and nuclear). Oil, water, solid impurities mixture inflow to oil purification section by the crude oil gutter; pressed cake into the fiber- recovery section by breaking screw conveyor

5. Clarification section: Machine-pressed crude oil first diluted with water washing, the fiber material removed from the oil through settlement and filtration, and then carry out continuous settlement, the whole divided into two parts: oil and sediment. Through centrifugal separation and vacuum drying, oil is pumped into the storage tank for storing; oil sediment by filtration and dirt oil separation, oil proceeds second settlement, dirty oil mixture proceeds clarification separation, Skim oil then be carried out a second settlement, sewage pumps to sewage treatment pond for dealing with.

6. Finished oil storage and transportation section: Finished crude oil is stored in storage tanks, the capacity of oil storage tank is two 1000 tons tanks, serve oil shed loading and issuing oil regularly to outside. Finished crude oil generally be stored and transported between at 32 ℃- 40 ℃, the working temperature of the palm oil should be at 50 ℃ to 55 ℃. to prevent overheating.

7. Fiber separation section: Press cake broken by breaking screw conveyor and then transported into the fiber separation air net and fiber polishing roller for fiber separating. The separated fiber material is sent to the boiler room as fuel; the separated stone is transported to stone warehouse by pneumatic conveying system for temporary storage.

8. Kernel recovery section: the stone needs intenerate tempering before being broken, the intenerating stone be divided into two or more petal by corrugated crusher, kernel was released. The broken mixture enters into broken mixture separation system; separation system adopts two stage separation and water separation. After separation, shell is sent to the warehouse for temporary storage, as boiler room fuel when necessary; the moisture content of separation kernel falls to below 7% through the hot air to dry. Dried kernel is sent to kernel storage warehouse for storing.

9. Sewage treatment section: the waste water has high organic matter content, biochemical oxygen demand BOD is about 25000ppm, required by qualified deal before emissions. Pool sewage treatment system is the most used and effective treatment. This treatment system is cost-effective, only needs adequate space, less investment costs.

Company Information

LD Sinoder Indutech Machinery Co., ltd (hereafter referred to as "Sinoder") is a joint-stock machinery manufacturing enterprise, integrating industrial scientific research, production and marketing. The company is located in the Industry Area Zone of LD, China.

.

Sinoder offer not only products with good quality and competitive price, but also top service and solution.

Website: www.sinoder.com

Packaging & Shipping

1.Waterproof packing with the international export standard by 20ft, 40ft, 40hp container.

2. Equipment Fittings, Electric Motor and Power Cabinet will be packed in Wooden Case or Iron Box. Other Equipment will be packed by Color-Stripes Plastic Cloth.

3. Or as per customer's requirements.

Our Services

1.Pre-sale services:

1) Selecting equipment type;

2) Designing and fabricating the products in accordance with the special requirements of the clients;

3) Training technical personnel for our clients;

4) Providing construction and technology consultations or working out proper construction schemes for those new, special or difficult projects.

2.Services provided during the sale:

Respect our clients; present the clients with ease, relaxation and a surprise; devote ourselves to improve the total value of our clients.

1) Checking products acceptance ahead of delivery;

2) Introducing the service system to our clients.

3. After-sale services:

Improve the added value of our products, and let the clients free from the using troubles:

1) Assisting the clients preparing for the first construction scheme;

2) Installing and testing the equipments;

3) Training the first-line operators on site;

4) Examining the equipment regularly;

5) Taking the initiatives to eliminate the failure(s) rapidly at site;

6) Distributing the guarantee fittings door-to-door;

7) Providing technical exchanging;

8) Providing maintenance for big item

FAQ

If you want to know more information , Pls to contact us

LD LD

Shandong Leader Machinery Co.,ltd. Established in 1997, we have more than 20 years experience. Our goal is to be pioneer in global grain and vertical sterilizing for FFB processing,Sterilizing for palm fruit pressing industry.
AAA1

Shandong Leader Machinery Co.,ltd. professor often go abroad attending grain and oil conference and forum. Shandong Leader Machinery Co.,ltd. have completed service line including technical department, engineering department,project department,electronic commerce department, domestic trade department and foreign trade department. After signing contract, we will set up special team including engineers, installation technicians, drawing designer, business person, after-sales service person, and so on. We will provide one-to-one service.
AAA2

vertical sterilizing for FFB processing,Sterilizing for palm fruit pressing is supported by track and can prolong the service life of screen deck by not touching it.
vertical sterilizing for FFB processing,Sterilizing for palm fruit pressing is driven by world leading double-shaft hydraulic motor, with balance force, reliableoperation and less maintenance cost.
Specialty suitable for the extraction of high oil and high power materials, and better immersion effect can be expected for ordinary oil plants.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: sales9@ldfoodmachine.com

Categories